Simgasm Sport Custom Color is an adjustable sim racing chassis built around 40 × 120 mm main aluminium profiles, providing a stable foundation for a Direct Drive wheelbase and demanding pedals. Available in blue, green, orange, purple, red and gold, with Bottom Mount, Front Mount, Side Mount or Asetek Front Mount. The pedal platform has a rated braking load of up to 300 kg, and the Apex arm, heel rest and rubber feet are included.
You might also like
Simgasm Hobby White
Simgasm Hobby Silver
Simgasm Club Black
Simgasm Club Silver
Simgasm Club White
Simgasm Sport Black
Simgasm Sport Silver
Simgasm Sport White
Simgasm Pro Black
Simgasm Pro Silver
Simgasm Pro White
Simgasm Hobby Custom Color
Simgasm Club Custom Color

A driving position shaped around your seat and equipment
Adjustment of the wheel section, pedal-platform height and angle, and seat-mount cross members helps set the distances between your hands, feet and seat. Build a GT or Formula-style layout according to your seat and its mounting arrangement.
The frame measures 580 mm wide, 1320 mm long and 720 mm high. Allow additional space for the seat, controls, side accessories and getting in and out when planning the installation.
Four mounting options for different wheelbases
Bottom Mount, Front Mount, Side Mount and Asetek Front Mount serve different wheelbase mounting patterns. They allow the same Sport chassis to accommodate different bases with the appropriate support arrangement.
Match the mount to the exact wheelbase model. The standard Front Mount is intended for supported Simucube and VRS bases, while Asetek Front Mount serves supported Asetek bases. The standard Front Mount does not fit SIMAGIC wheelbases.


A pedal platform for demanding braking inputs
The pedal platform has a rated braking load of up to 300 kg and supports demanding pedal setups, including load-cell pedals. Height and angle adjustment help position your feet, while profile spacing beneath the pedals can be matched to their mounting points.
The included heel rest provides support in front of the pedals. The 300 kg figure refers to the pedal platform braking load and does not define a maximum user weight or total chassis payload.
Cable routing within a modular profile frame
Integrated cable passthroughs help route wheelbase, pedal and accessory cables within the frame. An organised installation makes connections easier to reach when changing equipment and reduces loose cabling around the setup.
The profile slots allow compatible mounts and accessories to be positioned as required. Check cable routes before final tightening and leave enough slack for adjustment.


Six colours with an anodised profile finish
Blue, green, orange, purple, red and gold let you match the frame to your room and equipment. Custom Color refers to coloured profile finishes without decorative liveries, with a high-quality anodised finish on most profiles.
Colour changes the appearance of the setup, while each version retains the Sport chassis with 40 × 120 mm main profiles. This lets you choose the finish independently of the wheel-mount option you need.
Apex side arm and room for future upgrades
The included Apex arm provides mounting space for a compatible shifter or handbrake. Fit it on the left or right and set its height around the seat and wheel position. The controls themselves are separate purchases.
Sport is also prepared for motion integration. A motion upgrade requires a separate system and installation hardware and load limits matched to the chosen setup.


Assembly and adjustment in a practical order
Fasteners, tools and white assembly gloves are supplied. Assemble the frame on a flat surface and leave adjustable connections lightly tightened until the chassis alignment has been checked.
Set pedal spacing and seat position first. Adjust wheel-mount height and angle last, then tighten the joints. This sequence makes it easier to fit the driving position before the first session.
Key features and benefits
Key features
- 40 × 120 mm main aluminium profiles in six special colours.
- Four wheel-mount options, with one selected mount included.
- Adjustable pedal platform with a rated braking load of up to 300 kg.
- Integrated cable passthroughs and a motion-ready chassis.
- Apex side arm, heel rest and rubber feet included.
- Adjustable wheel, pedal and seat-mount sections.
Benefits when building your setup
Adjustment helps match distances and angles to the seat and controls, while the shared frame keeps the equipment on a stable foundation. Cable passthroughs help organise the installation, the Apex arm creates space for an additional control, and the profile structure supports future upgrades.
Who is Simgasm Sport for?
For sim racers building a permanent setup with a Direct Drive wheelbase and demanding pedals, and for users upgrading an existing rig. It suits those who want extensive adjustment, a coloured frame and room to develop the setup, including motion integration. The seat and electronics are selected separately.
- Warranty
- 24 months
- Fixing method
- Bottom
Front mount
Side - Konstruction
- Aluminium profiles
| Specification | Value |
|---|---|
| Brand and model | Simgasm Sport, C120 series |
| Product type | Modular sim racing cockpit chassis supplied for self-assembly |
| SKU | Depends on frame colour and wheel mount; full variant table below |
| Materials | Aluminium profiles and metal mounting components |
| Main profile | 40 × 120 mm |
| Profile finish | High-quality anodised finish on most profiles |
| Colours | Blue, green, orange, purple, red and gold |
| Wheel mount | Bottom Mount, Front Mount, Side Mount or Asetek Front Mount |
| Chassis dimensions (W × L × H) | 580 × 1320 × 720 mm; excluding seat and additional equipment |
| Reference weight | 38.94 kg for the gold Bottom Mount variant; other configuration weights unconfirmed |
| Pedal platform | Adjustable height, angle and profile spacing to suit the pedals |
| Rated pedal-platform braking load | Up to 300 kg; a pedal-platform rating, not a maximum driver weight |
| Wheel section | Adjustable mount positioning; available settings depend on the selected mount |
| Seat mounting | Adjustable cross members; seat, slider and additional seat brackets selected separately |
| Side arm | Apex included; fits on the left or right |
| Heel rest and feet | Heel rest and rubber feet included |
| Cable routing | Integrated cable passthroughs |
| Motion integration | Motion-ready chassis; motion system and installation hardware selected separately |
| Reference packaging | 2 boxes: 1050 × 190 × 200 mm and 615 × 270 × 110 mm |
| Assembly | Self-assembly; fasteners, tools and white assembly gloves included |
You might also like
