1,056.10zł
SIMNET SP EVO is an adjustable sim racing pedal system for PC, featuring a 100 kg Load Cell brake with 12-bit readout. SIMNET SP EVO 2P includes a throttle and brake, while SIMNET SP EVO 3P adds a clutch. Both sets are supplied without a shared baseplate or Hydro Link. The Baseplate and Hydro Link are available separately. Compatible with consoles, provided that it is connected to equipment that is compatible with the console.
You might also like
SIMNET SP EVO is a modular sim racing pedal system, available as a throttle and brake or a complete set with a clutch. Choose 2P for cars driven with two pedals and steering wheel paddle shifters. The 3P version adds a separate clutch for starts and cars that require clutch operation.
Both variants include the individual pedal modules with their standard equipment. The SP-BP-A Baseplate and Hydro Link brake upgrade are available separately. Individual modules allow pedal spacing and position to be matched to the mounting options of your cockpit.
SIMNET SP EVO uses stainless steel 3 mm thick or more, with a powder-coated finish. Bearing-supported pivots reduce friction in the mechanism, while adjustable faceplates let you set the contact position for your feet.
SP EVO introduces larger standard faceplates, dedicated elastomers, and wider angle and travel adjustment options. Mechanical setup affects both comfort and the way you make repeatable inputs during longer driving sessions.
The SIMNET SP EVO brake uses a Load Cell sensor with a 0-100 kg range and 12-bit readout. It lets you modulate braking through pressure while matching the mechanical feel to your preferred resistance and travel. The sensor range does not specify the force that must be applied by your foot at the faceplate.
The set includes nine elastomers, three each in 60A, 80A and 90A hardness, plus a long spring for a softer feel with longer travel. Additional springs are available separately. Mechanical adjustment and sensitivity settings let you tune the brake without purchasing Hydro Link.
The SIMNET SP EVO throttle lets you adjust initial resistance, mechanism position and maximum travel. Pedal angle and faceplate height can also be set to match foot movement to your seating position.
These adjustments help configure the throttle for gentle power application or a shorter foot movement, according to your preference and the car. The standard damper is a separate part of the mechanism; the sensors operate independently of the damping system.
SIMNET SP EVO 3P includes a clutch with an adjustable three-stage feel mechanism. This lets you tune the change in resistance during pedal travel to your preferred feel for starts and manual gear changes.
Adjustment covers preload, mechanism position, maximum travel, angle and faceplate height. The clutch is an individual module, allowing its position to be matched to the spacing of the throttle and brake. The 2P variant does not include a clutch pedal.
SIMNET SP EVO connects to a computer through the Multi-function Control Box and USB cable. SimConnect Manager calibrates the axes, adjusts deadzones and response curves, and displays the signal as you operate the pedals.
The controller also supports haptic modules and provides an RGB port. With suitable accessories added, effects can be configured in SimHub according to the telemetry available from the game. Vibration modules, mounts and the required power supply are optional equipment.
The SIMNET SP EVO 2P and 3P sets in this offer are supplied without a shared plate or Hydro Link. The modules must be secured to the rig structure. The separately available SP-BP-A Baseplate uses a 10 mm thick 6061 aluminium plate and provides heel support with adjustable height, position and angle.
Hydro Link is a separate brake upgrade kit and is not part of the standard variants. Accessories can be purchased later as your rig develops; equipment shown in optional-accessory illustrations is not included with the pedal sets.
| Specification | Details |
|---|---|
| Brand / model | SIMNET / SP EVO |
| Product type | Modular sim racing pedals, 2P or 3P version |
| SIMNET SP EVO 2P | Throttle and brake |
| SIMNET SP EVO 3P | Throttle, brake and clutch |
| SKU - SIMNET SP EVO 2P | Not specified |
| SKU - SIMNET SP EVO 3P | Not specified |
| Brake | Load Cell sensor, sensor range 0-100 kg |
| Brake readout resolution | 12-bit |
| Sensor sensitivity adjustment | 3 levels |
| Pedal construction | Stainless steel, 3 mm thick or more, according to the manufacturer specification |
| Finish | Electrostatic powder coating |
| Mechanism | Bearing-supported pivots, individual pedal modules |
| Mechanical adjustment | Pedal position and angle, faceplate height, resistance and maximum travel |
| Brake tuning components | 9 elastomers: 3 each in 60A, 80A and 90A hardness; long spring for softer, longer travel |
| Clutch | Adjustable three-stage feel mechanism, 3P version only |
| PC connection | USB via the SIMNET Multi-function Control Box |
| Software | SIMNET SimConnect Manager, calibration, deadzones, response curves and live signal display |
| Haptic support | Expandable with HPM-L, HPM-R or PTT; modules, mounts and suitable power supply selected separately |
| SimHub / RGB | SimHub support and an RGB port on the controller; suitable accessories and configuration required |
| Connection to selected wheelbases | Optional Enhanced RJ12 cable matched to the wheelbase; separate purchase and compatibility check required |
| Baseplate and heel support | Not included; optional SP-BP-A sold separately |
| Hydro Link | Not included; optional hydraulic brake upgrade sold separately |
| Manufacturer-stated net weight | 2-pedal set: 4.1 kg; separate clutch module: 1.9 kg. No separate complete 3P set weight is specified. |
| Overall set dimensions | Not specified |
| Feature | SIMNET SP EVO 2P | SIMNET SP EVO 3P |
|---|---|---|
| Number of pedals | 2 | 3 |
| Throttle | Included | Included |
| Load Cell brake | Included | Included |
| Clutch | Not included | Included |
| Baseplate / heel support | Sold separately | Sold separately |
| Hydro Link | Sold separately | Sold separately |
| Typical use | Cars driven with throttle and brake, using paddle shifters | Manual starts and cars with transmissions requiring clutch operation |
SIMNET SP EVO 2P includes a throttle and brake, while SIMNET SP EVO 3P adds a clutch. Both variants are supplied without the Baseplate and Hydro Link. Choose the version according to whether you need a separate clutch pedal.
The SIMNET SP EVO brake reads the load on a strain-gauge sensor with a 0-100 kg range. Braking input is based on pressure, helping you modulate braking through leg effort. The 100 kg figure describes the sensor range, rather than a confirmed force required at the pedal faceplate.
The Baseplate and shared heel support are not included with either SIMNET SP EVO 2P or 3P. The pedals can be mounted individually on a suitable rig structure. The SP-BP-A plate with adjustable heel support is available separately.
The SIMNET SP EVO 2P and 3P variants in this offer do not include Hydro Link. Hydro Link is a separately sold brake upgrade kit. A standard pedal damper and Hydro Link are two different systems.
SIMNET SP EVO provides adjustment of resistance, maximum travel, pedal position and angle, and faceplate height. Brake feel can be changed with elastomers in three hardness levels and the included long spring. Additional spring kits are optional accessories.
Connect the SIMNET SP EVO pedals to the SIMNET Multi-function Control Box, then connect the controller to a PC using the USB cable. Calibrate and configure the axes in SIMNET SimConnect Manager. A wheelbase connection is not required when using USB on PC.
USB connection to a PC is the primary way to use SIMNET SP EVO. Operation through a wheelbase requires a compatible ecosystem and the appropriate Enhanced RJ12 cable, purchased separately. Confirm the exact wheelbase, cable and platform before buying for console use.
Vibration modules are not part of the standard SIMNET SP EVO 2P and 3P sets. The system can be expanded with compatible HPM-L, HPM-R or PTT modules. Suitable mounts, power supply and software configuration are required for this upgrade.
SIMNET SimConnect Manager calibrates the pedals, adjusts deadzones and response curves, and displays the input signal. With optional haptic hardware fitted, it also configures the haptic system, while telemetry effects can be handled in SimHub.
SIMNET SP EVO must be mounted securely to a suitable pedal deck or rig structure. A pressure-sensitive brake needs support that limits pedal movement under braking. A shared Baseplate is optional, but secure mounting of each module is essential.
SIMNET products are covered by warranty protection for up to 2 years within the European Union, in accordance with SIMNET warranty terms. Simline is an authorised seller of the brand, as confirmed by SIMNET's official directory of authorised sellers.
As an authorised SIMNET partner, Simline.eu acts as an intermediary in the warranty process and handles submissions. Email support@simline.eu with a description of the issue and photos and videos showing the defect, then prepare the equipment for safe packing.
Sold separately: SP-BP-A Baseplate with heel support, Hydro Link brake upgrade, haptic modules with suitable mounts and power supply, Enhanced RJ12 cables, and additional spring kits. A shared baseplate and heel support are not included with either variant.
You might also like
English 
Polski
