Free shipping from PLN 200 for Poland and from EUR 350 for the entire European Union

Fanatec CSL Cockpit Monitor Stand with example monitor mount
Fanatec CSL Cockpit Monitor Stand with vesa adapter
Fanatec CSL Cockpit Monitor Stand front view
  • New
Fanatec CSL Cockpit Monitor Stand with example monitor mount
Fanatec CSL Cockpit Monitor Stand with vesa adapter
Fanatec CSL Cockpit Monitor Stand front view

Fanatec CSL Cockpit Monitor Stand

CSL_C_MS
882.93zł

882.93zł
Ready to send

Fanatec CSL Cockpit Monitor Stand is a freestanding mount for one monitor or TV up to 60 inches, including 57-inch ultrawide displays. It offers height adjustment and two mounting plates supporting VESA 100 × 100, 200 × 100 and 200 × 200 mm. It does not attach to the cockpit, and cables can run inside the tubes. The display and cockpit are sold separately.

Ask about product
Zapytanie dotyczy produktu: Fanatec CSL Cockpit Monitor Stand
* - pola obowiązkowe
Send
You will receive an 8.83zł for each item of this product to use on your next purchase.
Close
Shipping within 24 hours
Secure payments
Return within 30 days
Delivery from PLN 0

Available accessories

- Additional accessories

Fanatec CSL Cockpit V1.5

Fanatec CSL Cockpit V1.5

893.50zł
Fanatec CSL Cockpit Seat

Fanatec CSL Cockpit Seat

486.99zł

You might also like

 

A separate screen stand with no cockpit attachment

CSL Cockpit Monitor Stand positions the display independently of the rig frame. It suits setups where a cockpit-mounted holder is not wanted, including rigs other than Fanatec CSL.

The freestanding design makes it easier to change the distance between the screen and seat. Allow room for the base when planning the layout, and check that the stand clears the wheel and pedals.

Fanatec CSL Cockpit Monitor Stand with mounted monitor stand
Fanatec CSL Cockpit Monitor Stand with big vesa adapter

One large display and three VESA patterns

The stand supports one monitor or TV up to 60 inches. Fanatec also includes 57-inch ultrawide displays in its stated compatibility. Two supplied plates accommodate VESA 100 × 100, 200 × 100 or 200 × 200 mm.

Diagonal size is not the only fit requirement. Check the mounting pattern, rear housing and the specific display's mounting instructions before installation.

Screen height matched to your driving position

Height adjustment helps align the display with the seat and driving position. Check the screen from the position you actually use when driving, rather than setting its height while standing beside the rig.

Moving the complete stand also changes the viewing distance. Screen placement does not have to follow the location of a mounting point on the cockpit frame.

Fanatec CSL Cockpit Monitor Stand with small vesa adapter

Cable routing inside the tubes

Hollow tubes allow some of the wiring to run inside the structure. Cable caps and hook-and-loop straps help organise cable exits and reduce loose wiring around the setup.

The kit includes tools, fasteners, and rubber and felt pads. Follow the manual specifically for CSL Cockpit Monitor Stand when assembling it, rather than instructions for a different Fanatec stand.

Check Pedals
Check Steering Wheels
Check Direct Drive
Konstruction
Tubes/Pipes
Type of accesories
Monitor/TV Stand
Parameter Details
SKU CSL_C_MS
Manufacturer model CSL Cockpit Monitor Stand
Design Freestanding floor stand, independent of the cockpit frame
Number of displays 1 monitor or TV
Supported screen size Up to 60 inches; the manufacturer also includes 57-inch ultrawide displays
VESA patterns 100 × 100, 200 × 100 and 200 × 200 mm
Mounting plates 2, selected to match the display's mounting pattern
Height adjustment Yes; no numerical adjustment range is stated on the product page
Cable management Internal tube routing; cable caps and hook-and-loop straps included
Base pads Rubber and felt pads included
Maximum load in kg Not specified in the manufacturer documentation reviewed
Weight and external dimensions Not specified in the manufacturer documentation reviewed
Item Compatibility and requirements
Monitor or TV One screen up to 60 inches with VESA 100 × 100, 200 × 100 or 200 × 200 mm; also check the rear housing and the display manufacturer's mounting requirements
57-inch ultrawide A size explicitly supported by Fanatec; a matching VESA pattern is required
Other VESA patterns VESA 75 × 75, 300 × 300 and 400 × 400 mm are not listed as supported by the included plates
Fanatec CSL Cockpit Visually matched stand; positioned separately without attaching to the cockpit frame
Other cockpits and setups Can be used independently of cockpit brand, provided there is enough room for the base and display
Triple-monitor setups This model is intended for one screen; compatibility with extensions for other Fanatec stands should not be assumed

1. Does the stand attach to the cockpit?

No. CSL Cockpit Monitor Stand sits on the floor and does not connect to the cockpit frame. The screen position can therefore be set independently of the wheel and seat.

2. What screen size does it support?

Fanatec specifies screens up to 60 inches, including 57-inch ultrawide monitors. Check the VESA pattern and the display manufacturer's requirements as well as its diagonal size.

3. Which VESA patterns are supported?

The two included plates support VESA 100 × 100, 200 × 100 and 200 × 200 mm. Do not assume that a different pattern fits directly or that an unverified adapter is suitable.

4. Will every 60-inch TV fit?

Screen size alone does not confirm compatibility. The mounting pattern, access to the mounting area and the display's requirements also matter. Fanatec does not publish a separate load limit in kilograms in the documentation reviewed.

5. Is the screen height adjustable?

Yes. The stand provides height adjustment, while moving the complete stand changes the viewing distance. The manufacturer does not give a numerical height adjustment range on this model's product page.

6. Can it be used with another brand's cockpit?

Yes. As it does not attach to the frame, it does not require a particular cockpit mounting pattern. Check the available floor space and ensure that the stand and display can be positioned without interfering with the rig.

7. How does Monitor Stand differ from CSL Cockpit Monitor Holder?

Monitor Stand is a separate floor-standing structure. Monitor Holder is a different product that mounts to the cockpit. Choose the Stand when the screen needs to be positioned independently of the rig frame.

8. Can cables run inside the stand?

Yes. Hollow tubes allow internal cable routing. Cable caps and hook-and-loop straps are included to help organise the wiring. Planning the cable path before completing assembly makes installation easier.

9. Are a monitor and cockpit included?

No. The product includes the stand, mounting plates and accessories for assembly and cable management. The display, cockpit and other setup accessories are sold separately.

10. Does the stand require assembly?

Yes. Fasteners, tools and a Quick Guide are included. Follow the CSL Cockpit Monitor Stand PDF manual for the assembly sequence. Complete the structure as instructed and check the connections before fitting the display.

11. How long is the warranty on Fanatec products?

Simline is the largest authorised seller of Fanatec in Poland and Europe. We are also a Fanatec Certified Partner and are listed in Fanatec's official directory of authorised resellers and certified partners. As an authorised Fanatec partner, all products from this brand are covered by full warranty protection for up to 5 years within the European Union, in accordance with Fanatec warranty terms.

12. How is the warranty for Fanatec products handled?

As an official Fanatec partner within the European Union, we handle valid warranty claims using a Door-to-Door service. Collection and return of the equipment are arranged according to the instructions provided by our support team.

13. How do I submit a warranty claim for a Fanatec product?

Simline.eu is an authorised Fanatec partner, so we act as an intermediary in the warranty process and handle customer claims. Email support@simline.eu or fanatec@simline.eu with a description of the fault and photos or videos showing the problem, then prepare and pack the equipment.

  • Fanatec CSL Cockpit Monitor Stand frame components
  • Two VESA mounting plates
  • Tube caps, including cable-routing caps
  • Fastener covers
  • Rubber and felt base pads
  • Three hook-and-loop cable straps
  • Bolts, nuts and washers for stand assembly
  • Assembly tools
  • Quick Guide

A monitor or TV, cockpit and other setup equipment are not included.

No reviews

You might also like

Products from same category

Product added to wishlist
Product added to compare.