Free shipping from PLN 200 for Poland and from EUR 350 for the entire European Union

Fanatec ClubSport F1 18 Nm front view of bundle
Fanatec ClubSport F1 18 Nm front view of wheel
Fanatec ClubSport F1 18 Nm rear view of steering wheel qr
  • New
Fanatec ClubSport F1 18 Nm front view of bundle
Fanatec ClubSport F1 18 Nm front view of wheel
Fanatec ClubSport F1 18 Nm rear view of steering wheel qr

Fanatec ClubSport F1 18 Nm

CS_RW_F1_EU
4,064.23zł

4,064.23zł

Ready for shipping

Fanatec ClubSport Racing Wheel F1 18 Nm combines the 18 Nm holding-torque ClubSport DD+ wheel base with a 270 mm steering wheel. The package supports FullForce, QR2 and Windows PC, PlayStation 5 and PlayStation 4. The bundle-exclusive Formula wheel uses a 5 mm blue carbon-fibre front plate, perforated leather grips and an extensive rotary-control layout.

Ask about product
Zapytanie dotyczy produktu: Fanatec ClubSport F1 18 Nm
* - pola obowiązkowe
You will receive an 40.64zł for each item of this product to use on your next purchase.
Close
Shipping within 24 hours
Secure payments
Return within 30 days
Delivery from PLN 0
 


side view of bundle Fanatec ClubSport F1 18 Nm

Bundle-exclusive 270 mm Formula wheel

The ClubSport Steering Wheel F1 PS5 was created exclusively for this package and is not sold separately. Its 270 mm diameter and grip layout suit Formula driving, where rapid steering inputs and constant access to the controls are important.

The wheel uses a 5 mm blue carbon-fibre faceplate and perforated genuine leather grips. Its compact shape keeps the rotary controls, switches and thumb encoders close to the driver's hands.

ClubSport DD+ in a Formula configuration

ClubSport DD+ delivers 18 Nm of holding torque after firmware V1.4.2.3 or newer is installed. FullForce can add finer vibration cues to the main force-feedback signal when the selected game supports the protocol.

The metal QR2 Wheel-Side and QR2 Base-Side Type-F are factory-installed. The Wheel Base can be attached through its bottom or side rails using the four supplied T-nuts. Pedals and cockpit-specific mounting hardware must be selected separately.

diagram of slew rate Fanatec ClubSport F1 18 Nm
steering wheel of bundle Fanatec ClubSport F1 18 Nm

Telemetry and magnetic shifting

The 1-inch 128 × 64 white OLED can display gear, speed and other data supplied by a compatible game. Nine RevLEDs can indicate engine speed and the shift point, while six FlagLEDs can report flags, pit-limiter status or tyre slip.

The factory-installed ClubSport Magnetic Paddle Module uses 3 mm black-anodised aluminium paddles and neodymium magnets. Two primary paddles handle gear changes, while the second pair expands the number of inputs available at the fingertips.

Controls for single-seater racing

The wheel provides 11 buttons, two two-way toggle switches, two 12-position switches, a FunkySwitch, an analogue joystick and two thumb encoders. These inputs can be assigned to brake balance, traction control or other functions exposed by the selected game.

The Tuning Menu can be opened from the wheel to adjust available Wheel Base settings without leaving the driving session. Supported inputs and assignments depend on the platform and the game's Fanatec implementation.

Zoom view of details in steering wheel from bundle Fanatec ClubSport F1 18 Nm
Wheel size
270
Steering wheel type
Open (GT, Formula)
Grip material
PU
Real leather
Buttons quantity
11
Rotaries quantity
3
Thumbs rotaries
2
Communication
USB
Display
Yes
RPM Leds
Yes
Max torque
18 nm
Fixing method
Bottom
Side
Platforms Compatibility
PC
PS Compatible
Playstation
Force Feedback Type Support
Mixed Telemetry Effects Support
Parameter Details
Manufacturer Fanatec
Type Direct Drive wheel package
Wheel base ClubSport DD+
Holding torque 18 Nm with firmware V1.4.2.3 or newer
Drive Direct Drive
Technologies FullForce, FluxBarrier
Cooling Passive
Rotation Up to 2520 degrees
Wheel diameter 270 mm
Wheel quick release metalowy QR2 Wheel-Side
Base quick release QR2 Base-Side Type-F
Display 1-inch white OLED, 9 RevLEDs and 6 FlagLEDs
Platforms Windows PC, PlayStation 5 and PlayStation 4
In the box Steering wheel, ClubSport DD+ base, QR2 on both sides, power supply, T-nuts, USB cable and guide
Component or configuration Status Information
Windows PC Compatible Full functionality depends on the game
PlayStation 5 and 4 Compatible ClubSport DD+ is officially supported
Xbox One and Series X|S Wheel dependent Requires an Xbox-licensed wheel instead of the included model
Fanatec QR2 wheels Compatible Check the torque limit of the selected quick release
Fanatec pedals Compatible Connect to the base pedal port
Fanatec shifter and handbrake Compatible Dedicated ports on the base
Cockpit Required Mount through the side or bottom rails

1. How much torque does the package deliver?

18 Nm of holding torque after updating to firmware V1.4.2.3 or newer.

2. Is this a Direct Drive system?

Yes. The steering wheel connects directly to the motor shaft.

3. What is FullForce?

It is a protocol for high-frequency effects and requires support from the game.

4. Does the base use a fan?

No. Cooling is passive.

5. Which quick-release system is used?

The base has QR2 Base-Side Type-F and the wheel uses metalowy QR2 Wheel-Side.

6. Does it work on PC?

Yes.

7. Does it work on PlayStation?

Yes. ClubSport DD+ is officially compatible with PlayStation 5 and 4.

8. Does it work on Xbox?

Only after fitting a compatible Fanatec wheel with Xbox electronics.

9. Are pedals included?

No. Pedals must be selected separately.

10. Is the firmware update important?

Yes. Version V1.4.2.3 or newer is required to reach 18 Nm holding torque.

11. How long is the warranty on Fanatec products?

Simline.eu is the largest authorised Fanatec partner in Poland and Europe. All Fanatec products are covered by full warranty protection for up to five years within the European Union, in accordance with Fanatec's warranty terms.

12. How is the warranty for Fanatec products handled?

As an official Fanatec partner within the European Union, we handle valid warranty claims using a Door-to-Door service. Collection and return of the equipment are arranged according to the instructions provided by our support team.

13. How do I submit a warranty claim for a Fanatec product?

Simline.eu is an authorised Fanatec partner, so we act as an intermediary in the warranty process and handle customer claims. Email support@simline.eu or fanatec@simline.eu with a description of the fault and photos or videos showing the problem, then prepare and pack the equipment.

14. What does Xbox One and Xbox Series X/S compatibility mean for a Fanatec product?

Xbox compatibility is provided by a steering wheel equipped with officially licensed Xbox electronics. Once this steering wheel is attached to a compatible wheel base, the connected Fanatec setup can work with Xbox One and Xbox Series X/S. The availability of individual functions depends on the steering wheel, game and installed firmware.

15. What does PlayStation 4 and PlayStation 5 compatibility mean for a Fanatec product?

The product can work with PlayStation 4 and PlayStation 5 as part of a setup using an officially compatible Fanatec wheel base. Within the Fanatec ecosystem, the electronics responsible for PlayStation compatibility are located in the wheel base rather than the steering wheel. A compatible steering wheel, pedals and other Fanatec devices can be connected to that base. Available functions may also depend on the game.

16. Are Fanatec products compatible with a Windows PC?

Yes. Fanatec products are designed to work with Windows PCs. The wheel base connects to the computer through USB, while some steering wheels, pedals and accessories operate through a compatible Fanatec wheel base. The current Fanatec driver is required for hardware configuration and firmware updates, while the available functions may also depend on the game.

  • 1 × ClubSport Steering Wheel F1 PS5
  • 1 × QR2 Wheel-Side, factory-installed
  • 1 × Fanatec ClubSport DD+ 18 Nm Wheel Base
  • 1 × QR2 Base-Side Type-F, factory-installed
  • 1 × power supply with regional power cable
  • 4 × T-nuts for the rail mounting system
  • 1 × USB Type-C to Type-A cable
  • 1 × Quick Guide

Pedals and cockpit mounting components are not included.

No reviews


You might also like

Products from same category

Customers who bought this product also bought:

Product added to wishlist
Product added to compare.