Free shipping from PLN 200 for Poland and from EUR 350 for the entire European Union

Fanatec ClubSport Shifter Table Clamp front side view
Fanatec ClubSport Shifter Table Clamp simline.eu
  • New
Fanatec ClubSport Shifter Table Clamp front side view
Fanatec ClubSport Shifter Table Clamp simline.eu

Fanatec ClubSport Shifter Table Clamp

CSS_TC
212.20zł

212.20zł
PREORDER

The Fanatec ClubSport Shifter Table Clamp is a metal mount for attaching a ClubSport shifter to a desk or table. It supports the ClubSport Shifter, ClubSport Shifter SQ and SQ V1.5, offers continuous height adjustment when using the shifter's T-slot rails, and fits desktops up to 77 mm thick. Possible mounting of Clubsport Handbrake on side of Clubsport Shifter. Do not use the clamp on a glass tabletop.


Ask about product
Zapytanie dotyczy produktu: Fanatec ClubSport Shifter Table Clamp
* - pola obowiązkowe
Send
You will receive an 2.12zł for each item of this product to use on your next purchase.
Close
Shipping within 24 hours
Secure payments
Return within 30 days
Delivery from PLN 0

Available accessories

- Additional accessories

Fanatec Clubsport Shifter SQ V1.5

Fanatec Clubsport Shifter SQ V1.5

953.66zł
Fanatec Clubsport Handbrake V2

Fanatec Clubsport Handbrake V2

649.59zł

You might also like

 

A shifter at your desk without a separate cockpit

The Fanatec ClubSport Shifter Table Clamp lets you attach a ClubSport shifter to the edge of a desk or table. It suits a setup where the gear lever needs to sit beside the steering wheel without installing a separate cockpit.

The clamp supports the ClubSport Shifter, ClubSport Shifter SQ and ClubSport Shifter SQ V1.5. The shifter and all other setup components are sold separately.

Fanatec shifter mounted at the edge of a desk using the ClubSport Shifter Table Clamp
Fanatec ClubSport Shifter Table Clamp with two clamping screws, angled view

Continuous height adjustment using T-slot rails

When mounted through the shifter's side T-slot rails, the shifter height can be adjusted continuously before the bolts are tightened. This lets you position the gear lever to suit your driving position.

This mounting method uses the T-nuts and M5 bolts supplied with the ClubSport shifter. Height adjustment applies to the T-slot connection; top mounting is a separate configuration.

Mount on the left, right or top of the clamp

The shifter can be attached to the left or right side of the ClubSport Shifter Table Clamp, or to its top plate. These configurations let you adapt the gear lever position to your setup.

Top mounting uses 4 countersunk M6 bolts. The manual specifies a maximum thread length of 15 mm. Prepare the appropriate bolts and tools before assembly.

Driver changing gear with a Fanatec shifter mounted beside a desk
Desk setup with a Fanatec steering wheel and a shifter on the ClubSport Shifter Table Clamp

Metal clamp for desktops up to 77 mm thick

A metal structure and two clamping screws attach the ClubSport Shifter Table Clamp to a desktop up to 77 mm thick. Attaching the clamp to the desk does not require drilling holes.

Seat the clamp against the front edge of the desktop and check that both feet make full contact with the mounting surface. Do not use the clamp on a glass table, as stated in the manufacturer's warning.

Explore pedals
Explore steering wheels
Explore Direct Drive wheel bases
Fixing method
Table clamp
Type of accesories
Shifter/Handbrake mount
Specification Value
Manufacturer Fanatec
Model ClubSport Shifter Table Clamp
SKU CSS_TC
Product type Mechanical desk mount for a shifter
Construction Metal
Maximum desktop thickness 77 mm (7.7 cm)
Desktop fastening Two metal clamping screws
Shifter height adjustment Continuous when mounted using the shifter's side T-slot rails
Shifter mounting positions On the left or right side of the clamp, or on its top plate
Compatible shifters ClubSport Shifter, ClubSport Shifter SQ, ClubSport Shifter SQ V1.5
Top mounting 4 countersunk M6 bolts, maximum thread length 15 mm
T-slot rail mounting T-nuts and M5 bolts supplied with the ClubSport shifter
Additional use stated by the manufacturer Mounting a ClubSport Shifter SQ to the CSL Wheel Stand
Mounting restriction Do not use on a glass tabletop
Clamp dimensions and weight Not specified on the current product page

1. What is the Fanatec ClubSport Shifter Table Clamp for?

The Fanatec ClubSport Shifter Table Clamp attaches a ClubSport shifter to the edge of a desk or table. It lets you position the gear lever at a setup without a separate cockpit.

2. Which shifters are compatible with this clamp?

The clamp supports the ClubSport Shifter, ClubSport Shifter SQ and ClubSport Shifter SQ V1.5. The shifter is purchased separately.

3. What is the maximum desktop thickness?

The ClubSport Shifter Table Clamp supports desktops up to 77 mm thick. Both clamp feet must make full contact with the mounting surface.

4. Can I use the clamp on a glass desk?

Do not use the ClubSport Shifter Table Clamp on a glass tabletop. The manufacturer specifically prohibits this mounting surface to avoid damaging the table.

5. How does shifter height adjustment work?

Height is continuously adjustable when using the shifter's side T-slot rails. Tighten the mounting bolts after selecting the desired position.

6. Can I mount the shifter on the left or right?

The ClubSport Shifter Table Clamp allows the shifter to be mounted on either the left or right side of the clamp. Top mounting is also available.

7. Which bolts are needed for top mounting?

Top mounting requires 4 countersunk M6 bolts with a maximum thread length of 15 mm. The clamp manual does not confirm that these bolts are supplied with the clamp.

8. How do I attach the shifter using its T-slot rails?

Insert the T-nuts into the shifter's side rails, then attach the shifter to the clamp using M5 bolts. The manual states that the T-nuts and M5 bolts are supplied with the ClubSport shifter.

9. Does desk mounting require drilling holes?

The clamp attaches to the desktop using two clamping screws, without drilling the desk. Seat the clamp against the front edge and ensure that both feet make full contact with the mounting surface.

10. Are a shifter and tools included?

The package contains the ClubSport Shifter Table Clamp. The shifter is sold separately, and the Allen keys used in the assembly instructions are not included.

11. How long is the warranty for Fanatec products?

Simline is the largest authorised seller of Fanatec in Poland and Europe. We are also a Fanatec Certified Partner and are listed in Fanatec's official directory of authorised resellers and certified partners. As an authorised Fanatec partner, all products from this brand are covered by full warranty protection for up to 5 years within the European Union, in accordance with Fanatec warranty terms.

12. How is the warranty for Fanatec products handled?

As an official Fanatec partner within the European Union, we handle valid warranty claims using a Door-to-Door service. Collection and return of the equipment are arranged according to the instructions provided by our support team.

13. How do I submit a warranty claim for a Fanatec product?

Simline.eu is an authorised Fanatec partner, so we act as an intermediary in the warranty process and handle customer claims. Email support@simline.eu or fanatec@simline.eu with a description of the fault and photos or videos showing the problem, then prepare and pack the equipment.

  • 1 × Fanatec ClubSport Shifter Table Clamp, with two desktop clamping screws.

Sold separately: the ClubSport shifter and all other equipment shown in the setup photographs. Assembly tools are not included. The T-nuts and M5 bolts for side mounting come with the shifter. The manufacturer's clamp contents list does not confirm the inclusion of 4 M6 bolts for top mounting.

No reviews

You might also like

Products from same category

Product added to wishlist
Product added to compare.