Free shipping from PLN 200 for Poland and from EUR 350 for the entire European Union

Fanatec CSL Cockpit Uchwyt Na Monitor
Fanatec CSL Cockpit Uchwyt Na Monitor how its used
  • New
Fanatec CSL Cockpit Uchwyt Na Monitor
Fanatec CSL Cockpit Uchwyt Na Monitor how its used

Fanatec CSL Cockpit Uchwyt Na Monitor

CSL_C_MH
494.31zł

494.31zł
Lowest price in the last 30 days before the price reduction: 609.00zł
Ready to send

The Fanatec CSL Cockpit Monitor Holder mounts one VESA 100 × 100 mm screen directly to the CSL Cockpit, including the V1.5 version. Height and lateral adjustment help position the display around the driver, while two support rods provide extra stability for larger monitors. Mounting hardware, tools and a guide are included. The cockpit and monitor are sold separately.

Ask about product
Zapytanie dotyczy produktu: Fanatec CSL Cockpit Uchwyt Na Monitor
* - pola obowiązkowe
Send
You will receive an 4.94zł for each item of this product to use on your next purchase.
Close
Shipping within 24 hours
Secure payments
Return within 30 days
Delivery from PLN 0

You might also like

 

A screen mounted directly to the cockpit

The CSL Cockpit Monitor Holder bolts to the Fanatec CSL Cockpit frame. Your display becomes part of the rig without a separate floor-standing base.

It is a single-screen solution. The holder is a cockpit accessory, not a freestanding stand or a complete package with a monitor.

Black Fanatec CSL Cockpit monitor holder with VESA plate and two support rods
Rear view of a monitor mounted on the Fanatec CSL Cockpit holder

Position the display around the driver

Height and lateral adjustment help match the screen to your driving position. Set the seat and steering wheel first, then position the monitor.

Before final tightening, check your view, access to the monitor's controls and cable slack. The holder itself does not configure the field of view in your game.

Extra support for a larger display

Two rods help stabilise the monitor, particularly a wide ultrawide display. They supplement the VESA mounting and are included in the kit.

Correct assembly of the whole rig matters when using a Direct Drive wheel base. The screen remains connected to the frame, so extra support should not be treated as complete vibration isolation.

Close-up of two support rods and the side brackets of the CSL Cockpit monitor holder
Rear view of a monitor mounted on the Fanatec CSL Cockpit holder

VESA 100 × 100 mm mounting

The confirmed VESA 100 × 100 mm pattern describes the mounting-hole spacing on the back of the screen. Check the specific monitor's manual rather than relying on screen size alone.

M4 × 14 mm bolts are supplied. Their length must meet the monitor's requirements while allowing for the mounting plate thickness. The housing and connectors should remain clear of the holder.

Explore pedals
Explore steering wheels
Explore Direct Drive wheel bases
Type of accesories
Monitor/TV mount
0840440483465
Parameter Details
SKU CSL_C_MH
Manufacturer model CSL Cockpit Monitor Holder
Product type Cockpit-mounted monitor holder, not a freestanding stand
Intended cockpit Fanatec CSL Cockpit, including V1.5
Number of monitors 1
Confirmed VESA pattern 100 × 100 mm
Adjustment Monitor height and lateral position
Additional stabilisation 2 support rods included
Colour Black
Example screen sizes 32-inch and 49-inch ultrawide examples in Fanatec's guide; these do not define a minimum or maximum size
Maximum load capacity Not specified
Holder weight and dimensions Not specified
Numerical adjustment range Not specified
Component or configuration Information
Fanatec CSL Cockpit and CSL Cockpit V1.5 Dedicated direct frame mounting; cockpit sold separately
One VESA 100 × 100 mm monitor Confirmed pattern; check hole access and the monitor's mounting requirements
Ultrawide monitors Supported application; requires compatible VESA mounting and correctly positioned support rods
Triple-monitor setup No; this product holds one screen
Other cockpits and VESA patterns Compatibility is not confirmed; universal fit should not be assumed

1. Which cockpit does this holder fit?

The Fanatec CSL Cockpit, including CSL Cockpit V1.5. The holder bolts directly to the cockpit frame, which is sold separately.

2. Which VESA pattern is supported?

The confirmed pattern is 100 × 100 mm. Check your monitor's manual, mounting-hole access and any recess in the rear housing before buying.

3. Can it hold a 49-inch ultrawide monitor?

Fanatec gives a 49-inch ultrawide as an example application. This does not establish compatibility with every monitor of that size. Check the 100 × 100 mm VESA pattern and the specific screen's mounting requirements.

4. What is the maximum load capacity?

Fanatec does not state a kilogram rating in the product page and manual. Screen size and VESA spacing alone do not establish the permitted monitor weight.

5. How does Monitor Holder differ from Monitor Stand?

Monitor Holder attaches to the CSL Cockpit. Monitor Stand is a separate freestanding product. This holder does not have its own floor-standing base.

6. Can the monitor position be adjusted?

Yes. The holder offers height and lateral adjustment. Fanatec does not state numerical adjustment ranges.

7. What do the two extra support rods do?

They help stabilise the screen, particularly a larger ultrawide monitor. Position them as shown in the assembly instructions.

8. Does the holder completely isolate cockpit vibration?

No. It connects to the frame and does not independently isolate the monitor from the cockpit. The rods provide support, not a guarantee that all vibration is eliminated.

9. Can I mount three monitors?

No. The CSL Cockpit Monitor Holder is designed for one screen, not a triple-monitor setup.

10. Are the monitor and mounting hardware included?

Mounting components, bolts, tools and a guide are included. The monitor and cockpit are sold separately. Only use the supplied M4 × 14 mm monitor bolts if they meet your monitor's requirements.

11. How long is the warranty on Fanatec products?

Simline is the largest authorised seller of Fanatec in Poland and Europe. We are also a Fanatec Certified Partner and are listed in Fanatec's official directory of authorised resellers and certified partners. As an authorised Fanatec partner, all products from this brand are covered by full warranty protection for up to 5 years within the European Union, in accordance with Fanatec warranty terms.

12. How is the warranty for Fanatec products handled?

As an official Fanatec partner within the European Union, we handle valid warranty claims using a Door-to-Door service. Collection and return of the equipment are arranged according to the instructions provided by our support team.

13. How do I submit a warranty claim for a Fanatec product?

Simline.eu is an authorised Fanatec partner, so we act as an intermediary in the warranty process and handle customer claims. Email support@simline.eu or fanatec@simline.eu with a description of the fault and photos or videos showing the problem, then prepare and pack the equipment.

  • Fanatec CSL Cockpit Monitor Holder kit with VESA plate, brackets, crossbars and 2 stabilising support rods
  • Bolts and fasteners, including 4 M4 × 14 mm bolts and 4 M4 washers for monitor mounting
  • Assembly tools, including a 3 mm Allen key
  • 1 × Quick Guide

The monitor, cockpit, wheel base and other driving controls shown in application images are not included.

No reviews

You might also like

Products from same category

Product added to wishlist
Product added to compare.