690.24zł
Simgasm Apex Monitor Stand Legs reinforce the lower section of a compatible freestanding Apex display frame. Their 40 x 80 mm aluminium profiles help reduce movement and improve rigidity in wider or heavier multi-monitor layouts. The 13.1 kg kit ships in one 670 x 220 x 110 mm box. Select black MSALS-BLK or white MSALS-WIT on the same product page. This is a reinforcement accessory for an existing stand, not a complete monitor support.
You might also like
Simgasm Apex Monitor Stand Legs add support at floor level, where a freestanding display frame transfers its load into the room. Extending the base can make the structure feel more settled and help reduce movement that becomes increasingly visible as the monitor arrangement grows wider.
The upgrade is particularly relevant to multi-screen installations with side arms and a broad footprint. It leaves the display mounts untouched while reinforcing the section that supports the whole frame. Other independent display solutions can be compared under TV and monitor stands.
These monitor stand legs are an expansion module rather than a second frame. They do not replace the crossbar, VESA plates or side arms. Instead, they reinforce a compatible Apex stand at its base, preserving the existing screen arrangement and the modular layout of the original structure.
A setup may begin with the Simgasm Apex Monitor Stand or an appropriate multi-display version. Check the frame generation, connection points and colour before ordering the support kit.
Simgasm Apex Monitor Stand Legs are available as black MSALS-BLK and white MSALS-WIT versions. Both use 40 x 80 mm aluminium profiles, carry the same listed weight of 13.1 kg and arrive in a single 670 x 220 x 110 mm package.
Black blends into dark monitor housings and a matching frame, while white keeps a light Apex installation visually consistent. The published specifications do not change between colours, so the selection concerns the finish rather than a different reinforcement rating or installation method.
Compatibility cannot be inferred from a 40 x 80 mm profile alone. SIMGASM describes this kit for compatible Apex freestanding monitor stands. The product page does not confirm direct installation on Core integrated mounts, third-party monitor frames or every structure built from the same nominal profile size.
Set the frame on a level surface, verify all connection points and preserve access for cables before final tightening. No increased display-load rating is published for a stand fitted with these legs, so the kit should not be used to invent a higher monitor weight limit. Further matching components are listed on the SIMGASM page.
Simgasm Apex Monitor Stand Legs add support at floor level, where a freestanding display frame transfers its load into the room. Extending the base can make the structure feel more settled and help reduce movement that becomes increasingly visible as the monitor arrangement grows wider.
The upgrade is particularly relevant to multi-screen installations with side arms and a broad footprint. It leaves the display mounts untouched while reinforcing the section that supports the whole frame. Other independent display solutions can be compared under TV and monitor stands.
These monitor stand legs are an expansion module rather than a second frame. They do not replace the crossbar, VESA plates or side arms. Instead, they reinforce a compatible Apex stand at its base, preserving the existing screen arrangement and the modular layout of the original structure.
A setup may begin with the Simgasm Apex Monitor Stand or an appropriate multi-display version. Check the frame generation, connection points and colour before ordering the support kit.
Simgasm Apex Monitor Stand Legs are available as black MSALS-BLK and white MSALS-WIT versions. Both use 40 x 80 mm aluminium profiles, carry the same listed weight of 13.1 kg and arrive in a single 670 x 220 x 110 mm package.
Black blends into dark monitor housings and a matching frame, while white keeps a light Apex installation visually consistent. The published specifications do not change between colours, so the selection concerns the finish rather than a different reinforcement rating or installation method.
Compatibility cannot be inferred from a 40 x 80 mm profile alone. SIMGASM describes this kit for compatible Apex freestanding monitor stands. The product page does not confirm direct installation on Core integrated mounts, third-party monitor frames or every structure built from the same nominal profile size.
Set the frame on a level surface, verify all connection points and preserve access for cables before final tightening. No increased display-load rating is published for a stand fitted with these legs, so the kit should not be used to invent a higher monitor weight limit. Further matching components are listed on the SIMGASM page.
| Technical specification - Simgasm Apex Quad Monitor Stand | |
|---|---|
| Construction | |
| Product type | Freestanding four-monitor stand in a 3+1 arrangement |
| Main material | Aluminium |
| Mounting components | Steel parts for increased joint rigidity |
| Profile size | 40 x 80 mm |
| Displays and adjustment | |
| Number of displays | Up to 4: centre, two sides and upper |
| Listed VESA patterns | 75 x 75 mm, 100 x 100 mm, 200 x 200 mm |
| Adjustment | Height, width, side-arm angles and upper-monitor position |
| Maximum display diagonal | Not stated on the verified product page |
| Maximum display weight | Not stated on the verified product page |
| Variants | |
| Black variant | MSAS4-BLK, listed weight 36 kg |
| White variant | MSAS4-WIT, listed weight 41 kg |
| Kit and packaging | |
| Kit modules | Apex single-monitor floor stand, matching Apex side-arm pair and Core upper-monitor module |
| Number of boxes | 3 |
| Main-stand box | 850 x 260 x 110 mm |
| Side-arm box | 630 x 150 x 130 mm |
| Upper-module box | 450 x 220 x 90 mm |
| Compatibility - Simgasm Apex Quad Monitor Stand | ||
|---|---|---|
| Standard or setup | Compatibility status | Important note |
| VESA 75 x 75 mm | Confirmed on the complete stand page | Check all four displays separately and select screws for their threaded inserts. |
| VESA 100 x 100 mm | Confirmed on the complete stand page | Account for recessed VESA areas, rear housings and connector access. |
| VESA 200 x 200 mm: lower row | Listed for the Apex system | Confirm display weight before fitting larger panels because no stand load limit is published. |
| VESA 200 x 200 mm: upper display | Current plate requires confirmation | The complete page lists 200 x 200 mm, but the upper component is named VESA 75/100. An adapter may be needed. |
| Other VESA pattern | No direct-fit confirmation | Any adapter must suit the display, stand plate and expected load. |
| Sim racing cockpits | Spatial compatibility | The stand uses its own floor base. Plan room for the frame and the full four-display layout. |
| Motion systems | Possible as an independent structure | Maintain clearance for full cockpit, seat, steering and cable travel. |
| Desk, trading or workstation | Supported use | Check desk height, floor space and whether the upper monitor remains comfortable to view. |
| Additional support legs | Not part of the standard kit | Verified bundle contents list the main stand, side arms and upper module. Reinforcement legs are selected separately. |
Three screens form the lower panorama: one centre and two sides. The fourth monitor mounts above the centre display.
No. Apex rests on its own floor base, allowing screen distance to change without disturbing the seat, wheelbase or pedals.
The complete stand page names 75 x 75, 100 x 100 and 200 x 200 mm. Verify the rear pattern on every display individually.
Confirm this before purchase. Although the complete product lists 200 x 200 mm, its upper component is described as a VESA 75/100 module.
No maximum diagonal is published. Housing size, VESA position, weight, connector access and the ability to align all four panels determine suitability.
The verified product page does not provide a load limit. Confirm each mounting position before using particularly heavy monitors or televisions.
Besides finish, the listed weights differ: black MSAS4-BLK is 36 kg and white MSAS4-WIT is 41 kg. Both use 40 x 80 mm profiles and the same 3+1 layout.
Stand height, width, both side-arm angles and upper-screen position can be adjusted. Complete final tightening after checking the entire image layout.
It combines the Apex centre stand, matching side-arm pair and Core upper-monitor module in three boxes. Displays and additional support legs are not listed in this standard bundle.
Browse TV and monitor stands. The range also includes the Simgasm Apex Monitor Stand and Simgasm Apex Triple Monitor Stand.
You might also like
English 
Polski
