Free shipping from PLN 200 for Poland and from EUR 350 for the entire European Union

VNM Shifter & Handbrake Plate top view
VNM Shifter & Handbrake Plate rear view with two products combined
VNM Shifter & Handbrake Plate front view with two products combined
VNM Shifter & Handbrake Plate simline.eu
  • New
VNM Shifter & Handbrake Plate top view
VNM Shifter & Handbrake Plate rear view with two products combined
VNM Shifter & Handbrake Plate front view with two products combined
VNM Shifter & Handbrake Plate simline.eu

VNM Shifter & Handbrake Plate

VNM-HBSPLA
135.95zł

135.95zł
Lowest price in the last 30 days before the price reduction: 162.86zł
Shipping in 3-5 days

VNM Shifter & Handbrake Plate joins VNM Shifter V1 with VNM Handbrake V1 or V1.5 on one mounting plate. It keeps both controls together on an aluminium-profile rig. Add VNM Shifter Table Clamps to use the assembly on a desk. Dimensions: 20 × 10 × 10 cm; weight: 0.3 kg.

Ask about product
Zapytanie dotyczy produktu: VNM Shifter & Handbrake Plate
* - pola obowiązkowe
Send
You will receive an 1.36zł for each item of this product to use on your next purchase.
Close
Shipping within 24 hours
Secure payments
Return within 30 days
Delivery from PLN 0

You might also like

 

VNM Shifter & Handbrake Plate - Shifter and handbrake on one mounting point

VNM Shifter & Handbrake Plate brings two separate controls together on one mounting point. Instead of building an individual support for each device, the shifter and handbrake can sit side by side as a single module. The VNM mounting plate keeps the side of the cockpit tidier and makes the relative position of both levers easier to maintain.

This layout is particularly useful in rally, drifting and cars that call for frequent manual gear changes. The driver can move a hand between the shifter and handbrake without reaching into two different parts of the rig. The plate is entirely mechanical, so it does not alter the operation, signal or calibration of either controller.

VNM Shifter & Handbrake Plate - top view
VNM Shifter & Handbrake Plate - rear view on example of use

Made for VNM Shifter V1 and VNM Handbrake

VNM Shifter & Handbrake Plate is designed to pair the VNM Shifter V1 with either VNM Handbrake V1 or the newer VNM Handbrake V1.5. Its mounting points are intended for these specific products, so it should not be presented as a universal adapter for controls from other brands.

The shifter and handbrake are not included with the plate. It is an add-on for owners who already use both VNM devices or plan to build the complete combination. Each controller retains its own cable, electronics and connection to the computer after installation.

Profile-rig installation or a desk-based setup

The main installation method is on the side of an aluminium-profile sim rig. The VNM mounting plate turns the two controls into one assembly, which can simplify installation and later repositioning. The complete module can be moved closer to the seat without adjusting separate brackets for the shifter and handbrake.

A desk installation is also possible when the plate is paired with VNM Shifter Table Clamps. Those clamps are separate accessories; the plate itself does not grip the desktop. Before assembly, allow enough space for both levers, their full range of movement and a comfortable path for the driver’s hand.

VNM Shifter & Handbrake Plate - front view in example of use
VNM Shifter & Handbrake Plate - top angled view

Compact hardware with no software required

VNM Shifter & Handbrake Plate weighs 0.3 kg, while the manufacturer lists dimensions of 20 × 10 × 10 cm. Its compact format avoids the need to place two unrelated mounting supports next to each other. The practical benefit is a simpler side section of the cockpit and a consistent position for two controls used throughout rally and drift driving.

No driver, firmware or calibration is needed for the plate. Once the hardware is installed, the shifter and handbrake are connected and configured independently. VNM does not publish the plate material, detailed hole spacing or a list of included fasteners on the product page, so available mounting hardware should be checked before installation.

VNM Shifter & Handbrake Plate - top view of plate

VNM Shifter & Handbrake Plate - Shifter and handbrake on one mounting point

VNM Shifter & Handbrake Plate brings two separate controls together on one mounting point. Instead of building an individual support for each device, the shifter and handbrake can sit side by side as a single module. The VNM mounting plate keeps the side of the cockpit tidier and makes the relative position of both levers easier to maintain.

This layout is particularly useful in rally, drifting and cars that call for frequent manual gear changes. The driver can move a hand between the shifter and handbrake without reaching into two different parts of the rig. The plate is entirely mechanical, so it does not alter the operation, signal or calibration of either controller.

VNM Shifter & Handbrake Plate - rear view of example products used to combine

Made for VNM Shifter V1 and VNM Handbrake

VNM Shifter & Handbrake Plate is designed to pair the VNM Shifter V1 with either VNM Handbrake V1 or the newer VNM Handbrake V1.5. Its mounting points are intended for these specific products, so it should not be presented as a universal adapter for controls from other brands.

The shifter and handbrake are not included with the plate. It is an add-on for owners who already use both VNM devices or plan to build the complete combination. Each controller retains its own cable, electronics and connection to the computer after installation.

VNM Shifter & Handbrake Plate - front view of products combined

Profile-rig installation or a desk-based setup

The main installation method is on the side of an aluminium-profile sim rig. The VNM mounting plate turns the two controls into one assembly, which can simplify installation and later repositioning. The complete module can be moved closer to the seat without adjusting separate brackets for the shifter and handbrake.

A desk installation is also possible when the plate is paired with VNM Shifter Table Clamps. Those clamps are separate accessories; the plate itself does not grip the desktop. Before assembly, allow enough space for both levers, their full range of movement and a comfortable path for the driver’s hand.

VNM Shifter & Handbrake Plate - top angled view of plate

Compact hardware with no software required

VNM Shifter & Handbrake Plate weighs 0.3 kg, while the manufacturer lists dimensions of 20 × 10 × 10 cm. Its compact format avoids the need to place two unrelated mounting supports next to each other. The practical benefit is a simpler side section of the cockpit and a consistent position for two controls used throughout rally and drift driving.

No driver, firmware or calibration is needed for the plate. Once the hardware is installed, the shifter and handbrake are connected and configured independently. VNM does not publish the plate material, detailed hole spacing or a list of included fasteners on the product page, so available mounting hardware should be checked before installation.

8936230211065
Technical specifications – VNM Shifter & Handbrake Plate
Basic information
Product code VNM-HBSPLA
Product type Combined shifter and handbrake mounting plate
Dimensions 20 × 10 × 10 cm
Weight 0.3 kg
Function Places both controls side by side as one assembly
Compatibility
VNM Shifter V1 Yes
VNM Handbrake V1 Yes
VNM Handbrake V1.5 Yes
Controls from other brands Compatibility not confirmed
Mounting methods
Aluminium-profile rig Yes
Desktop installation Yes – with VNM Shifter Table Clamps
Table clamps Required for desk use and sold separately
Important information
Shifter included No
Handbrake included No
Software Not required – mechanical product

VNM Shifter & Handbrake Plate – questions and answers

1. What is the VNM Shifter & Handbrake Plate?

It is a mounting plate that places a compatible VNM shifter and handbrake next to each other. The two controls form one assembly that can be attached to an aluminium-profile cockpit or, with additional clamps, a desk.

2. Are the shifter and handbrake included?

No. The product is the mounting plate only. The VNM Shifter V1 and VNM Handbrake V1.5 are separate controls and must be purchased individually.

3. Which shifter is compatible with the plate?

VNM confirms compatibility with Shifter V1. The same plate can be used whether the shifter is operated in its manual H-pattern configuration or sequential mode.

4. Does it fit the VNM Handbrake V1.5?

Yes. VNM Handbrake V1.5 is one of the intended devices. The manufacturer also lists the earlier VNM Handbrake V1 as compatible with the same mounting plate.

5. Can controls from other brands be installed?

No cross-brand compatibility is officially stated. The mounting points are intended for VNM Shifter V1 and VNM Handbrake V1 or V1.5. Other controls may use different bolt spacing and require another adapter.

6. How is the plate fitted to a sim rig?

The main installation method uses the side profile of an aluminium-profile cockpit. Once both controls are attached to the plate, the complete module can be positioned where the driver has comfortable access to both levers.

7. Can the plate be used on a desk?

Yes, but the plate does not clamp to the desktop by itself. A desk setup requires VNM Shifter Table Clamps. These are additional accessories and are not part of the mounting plate.

8. Can the arrangement of the controls be reversed?

The product is intended to place the two VNM controls side by side. The manufacturer does not document alternative orientations or a freely reversible layout, so the mounting holes should be checked against the planned driving position before installation.

9. What are the dimensions and weight?

VNM lists dimensions of 20 × 10 × 10 cm and a weight of 0.3 kg. These figures refer to the mounting product without the shifter, handbrake or optional table clamps installed.

10. Does the mounting plate need software or calibration?

No. It is a mechanical accessory without electronics. The shifter and handbrake retain their independent computer connections and must be configured according to the instructions supplied with each controller.

No reviews

You might also like

Products from same category

Product added to wishlist
Product added to compare.