104.88zł
MOZA Clamp for AY210 YOKE is a pair of desk clamps for the MOZA AY210 or MOZA AY90 base. Separate hand knobs adjust the pressure beneath the desktop, with no drilling into the desk needed. The product includes the mounting clamps only, without the base or yoke handle.
MOZA AY90 Force Feedback Yoke Base is a compact flight yoke base with 90 N pitch force, 4.2 Nm roll torque and 95 mm travel. Its Force Feedback can reproduce trim load, stalls, turbulence and touchdown. Combine AY90 with MOZA MFY or MFY PRO. Add the MOZA MGX1000 for instruments, or compare it with the stronger MOZA AY210 MFY Yoke Bundle. MFY or MFY PRO yoke are selling separately.
Moza AY90 Yoke PREORDER
1,462.60zł
MOZA AY210 is a professional-grade YOKE base with a realistic 160 mm pitch range and HALL sensors. Perfect for serious flight sim users seeking precision, durability, and compatibility with MSFS, X-Plane, and more.
2,682.11zł
You might also like
Want to use the MOZA AY210 or MOZA AY90 without bolting its base to a cockpit? This pair holds the base at the edge of a desk. The base rests on the desktop, while the two clamps keep it in place. No holes are needed in the furniture. These clamps fit both models, but they are not a universal mount for any flight yoke.
Each clamp has a pressure screw and a star-shaped knob operated from beneath the desk. Adjust the left and right sides separately, tightening gradually so the base stays aligned with the edge. When you finish flying, loosen both knobs to remove the mounting clamps. You do not need a spanner to operate the clamping screws.
The AY210 manual shows extension pads fitted at the protruding side sections of the base plate. Prepare these as instructed, place the clamps around those sections and tighten the lower pressure pads against the desk. This is separate from bolting the AY210 to a simulator frame through its bottom mounting holes. For the AY90, use the mounting points described in that base's manual.
Before ordering, check the desktop thickness and access underneath. A drawer, crossbar or thick trim along the edge may obstruct the clamping screws. The desk should be stable, with the base plate resting evenly on its surface. MOZA does not publish a maximum desktop thickness for this clamp. The 30 mm figure in the product dimensions is not a stated desk-thickness limit.
| Dimensions | 145 x 102 x 170 mm |
| Material | High-strength Steel |
| Steel Plate Thickness | 5 mm |
| Weight | 1.63 kg |
| Mounting Methods | 1. Desktop mounting: Hangs from the edge of a desktop. |
| 2. Bracket mounting: Attaches to rigs after removing the C-shaped plate. | |
| Currently Supported Product | AB9 FFB Base |
Manufacturer
Responsible person
You might also like
English 
Polski
