251.22zł
RECART VESA Axis is a set of three adjustable adapters for aligning a triple-screen setup. MTS fits the RECART MTS-01 stand, while MS-A is made for RECART Aluminium MTS-A. Both support 75 x 75 and 100 x 100 mm VESA patterns with two-axis adjustment through 10°. MS-A also adds 26.5 mm of movement on a third axis. Screws and an Allen key for installation and adjustment are included.
You might also like
RECART VESA Axis is available as MTS and MS-A. Both kits include three adapters, providing one mounting point for each display in a triple-screen setup. Select the version that matches the stand because their mounting interfaces are different.
VESA Axis MTS fits the steel RECART MTS-01 and attaches to its VESA hooks. VESA Axis MS-A is intended for the aluminium RECART Triple Monitor Stand MTS-A. The adapters should not be treated as interchangeable between these two stands.
Both variants correct monitor tilt and rotation across two axes. RECART states a 10° range. To change the position, loosen the adjustment screws, align the screen and tighten the joints again.
MS-A adds 26.5 mm of travel on a third axis. This can correct the monitor position without moving the complete stand arm. MTS does not provide this additional movement and relies on its two-axis angle adjustment.
RECART VESA Axis can be considered an alternative to adjustable VARIO VESA-style mounts. It supports individual screen alignment, but the correct variant must be selected for the matching RECART monitor stand.
Both versions support 75 x 75 and 100 x 100 mm VESA mounting patterns. Check the monitor hole spacing, rear-housing shape and access to the display connections before selecting a variant.
Recessed VESA holes may require suitable spacers. RECART VESA Axis does not directly support 200 x 100 or 200 x 200 mm patterns. A display using a larger standard requires an additional adapter plate or another mount.
Each variant contains three three-piece adapters, screws and an Allen key for angle adjustment. The package also includes the hardware required for the selected stand version. All-metal adapter parts have a powder-coated finish.
Begin alignment with the centre display. Once it is level, match the left and right monitors while checking the top and bottom bezel lines from the driving position. Complete the final tightening only after all three screens are aligned.
| Parameter | VESA Axis MTS | VESA Axis MS-A |
|---|---|---|
| Manufacturer | RECART | RECART |
| Product type | Three-monitor VESA adapter kit | Three-monitor VESA adapter kit |
| Number of adapters | 3 | 3 |
| Angle adjustment | 2 axes, 10° range | 2 axes, 10° range |
| Additional movement | None | 26.5 mm on a third axis |
| Supported VESA patterns | 75 x 75 mm, 100 x 100 mm | 75 x 75 mm, 100 x 100 mm |
| Compatible stand | RECART MTS-01 | RECART Triple Monitor Stand Aluminium MTS-A |
| Stand attachment | Screws and nuts on MTS-01 VESA hooks | Screws for MTS-A mounting |
| Construction | Metal, three-piece adapter | Metal, three-piece adapter |
| Finish | Powder coated | Powder coated |
| Maximum load | No separate value published by RECART | No separate value published by RECART |
| Net weight | Not published by RECART | Not published by RECART |
| Stand or monitor | Required variant | Information |
|---|---|---|
| RECART MTS-01 | MTS | Full compatibility confirmed by RECART. Attaches to the stand's VESA hooks. |
| RECART Triple Monitor Stand Aluminium MTS-A | MS-A | Full compatibility confirmed by RECART. Mounting is designed for the aluminium stand. |
| 75 x 75 mm VESA monitor | MTS or MS-A | Supported by both variants. Check screw length and the shape of the monitor housing. |
| 100 x 100 mm VESA monitor | MTS or MS-A | Supported by both variants. Recessed holes may require spacers. |
| 200 x 100 or 200 x 200 mm VESA monitor | No direct compatibility | An additional adapter plate or another mount is required. |
| Third-party monitor stands | Not confirmed | RECART only confirms the listed stands. Check the mounting geometry before purchase. |
| Item | MTS variant | MS-A variant |
|---|---|---|
| Three-piece RECART VESA Axis adapter | 3 pcs | 3 pcs |
| Adapter adjustment screws | 1 set | 1 set |
| Stand-mounting hardware | Screws and nuts for MTS-01 VESA hooks | Hardware for RECART MTS-A |
| Allen key for angle adjustment | 1 pc | 1 pc |
The monitor stand and displays are not included. Package contents depend on the selected mounting variant.
It aligns three monitors by correcting the tilt and rotation of each display.
MTS for RECART MTS-01 and MS-A for the aluminium RECART Triple Monitor Stand MTS-A.
They use different stand attachments. MS-A also provides 26.5 mm of movement on a third axis, which MTS does not have.
Three with either variant. One kit covers a complete triple-screen setup.
Both variants adjust across two axes through a 10° range.
MS-A. RECART specifies 26.5 mm of additional travel.
Both variants support 75 x 75 and 100 x 100 mm VESA patterns.
No. Select MS-A for the aluminium MTS-A monitor stand.
Yes. Each variant includes screws, hardware for its matching stand and an Allen key for adjustment.
No. The product contains three adapters and their mounting hardware. The stand and monitors are sold separately.
Simline.eu is the largest authorised RECART partner in Poland and Europe. All RECART products receive full warranty protection for up to 2 years within the European Union, according to the RECART warranty terms.
Simline.eu assists with the RECART warranty process and manages the claim after receiving the required documentation. Once the issue has been reviewed, our support team provides the next instructions for completing the claim.
Simline.eu is an authorised RECART partner, so we support customers throughout the warranty process and handle claim submissions. Email support@simline.eu or recart@simline.eu, include a description of the fault together with photos or videos showing the issue, then prepare and pack the product.
Yes. It is an alternative solution for precise monitor alignment in a triple-screen setup. It is not a universal replacement for every VARIO VESA mount, so select MTS or MS-A according to the compatible RECART stand.
You might also like
English 
Polski
